MSI MS-6301 Manual page 52

S.M.A.R.T. for Hard Disks
This option sets the SMART Function for the hard disk. The hard
disk need to have SMART function for this feature to work.
Boot up Num Lock
When this option is set to Off, AMI
key when the system is powered on. The end user can then use the arrow
keys on both the numeric keypad and the keyboard. The settings are On or
Off. The optimal default and Fail-Safe default settings are On.
BIOS Flash Protection
This item is used to protect BIOS from flashing. During Enabled,BIOS
can be flash. During Disabled, you will unabled to flash the BIOS.
Note: If jumper JP1 is onboard. The BIOS will not diplay this item.
Floppy Drive Swap
Set this option to Enabled to specify that floppy drives A: and B: are
swapped. The setting are Enabled and Disabled. The Optimal and Fail-Safe
default settings are Disabled.
Floppy Drive Seek
When this option is set to Enabled, AMI
command on floppy drive A: before booting the system. The settings are
Enabled and Disabled. The Optimal and Fail-Safe default settings are
Disabled.
®
PS/2 Mouse Support
When this option is set to Enabled, AMI
mouse. The settings are Enabled and Disabled. The Optimal and Fail-Safe
default settings are Enabled.
Primary Display
This option configures the primary display subsytem in the computer.
The settings are Mono(monochrome), 40CGA, 80CGA or VGA/EGA. The
optimal and Fail-Safe default settings are VGA/EGA.
®
®
BIOS turns off the Num Lock
®
BIOS performs a Seek
®
BIOS supports a PS/2
3-7
®