Password Setup - Epson TP1 Manual

Operation 5. Password Setup

5. Password Setup

Setup a password to limit operators for the brake equipment (6-axis robot only).
TEACH mode ........ [Jog&Teach]-[Brake] 6-Axis robot only
Follow the procedure below to set the password.
(1) Select EPSON RC+-menu-[Setup]-[System Configuration]-[SPEL Controller Board]-
(2) Click the <Change> button at "TP Password."
(3) The following dialog appears.
(4) Click the <Apply> button and reboot the Controller.
74
[Configuration] to display the following screen.
Enter a password within 16 alphanumeric characters from the keyboard and click the
<OK> button.
TP1 Rev.8