Brake (6-Axis Robots Only) - Epson TP1 Manual

Operation 2. TEACH Mode

2.8 Brake (6-Axis robots only)

This section indicates the brake ON / OFF switching for each joint.
NOTE

When you use the 6-axis robot, the <F8> key is displayed.
(1) Press the <F8> key in the [Jog & Teach] screen. The following screen appears.
48
The following screen appears when the password is set up.
Enter the password (1 to 16 characters) and press the <OK> key.
For password setting, refer to Operation 5. Password Setup.
TP1 Rev.8