Other Alarms - Digital Watchdog DWC-MTT4Wi6 User Manual

detection (this function is only available for the models with SD card slot).
Trigger Email: If "Trigger Email" and "Attach Picture" are checked (email address
must be set first in the Email configuration interface), the captured pictures and
triggered event will be sent into those addresses.
Trigger FTP: If "Trigger FTP" and "Attach Picture" are checked, the captured pictures
will be sent into FTP server address. Please refer to FTP configuration chapter for
more details.
2. Set motion detection area and sensitivity. Click the "Area and Sensitivity" tab to go
to the interface as shown below.
Move the "Sensitivity" scroll bar to set the sensitivity. Higher sensitivity value means
that motion will be triggered more easily.
Select "Add" and click "Draw". Drag the mouse to draw the motion detection area;
Select "Erase" and drag the mouse to clear motion detection area.
After that, click the "Save" to save the settings.
3. Set the schedule for motion detection. The schedule setup steps of the motion
detection are the same as the schedule recording setup (See Schedule Recording).

6.4.2 Other Alarms

⚫ SD Card Full
1. Go to Config→Alarm→Anomaly→SD Card Full.
25