Advertisement
Quick Links
Gobo Fireflash
Item ref: 151.742UK
User Manual
4 in 1 LED and Laser Effect light
Please read through this manual thoroughly before use, any damage
Caused by misuse of product will not be covered by warranty.
Thank you for choosing the QTX Gobo Fireflash LED and Laser Effect Light. A compact and robust metal
4-in-1 light effect, combining 6 moving colour gobos, 3 colour Effect ball, a 20W White Strobe LED and
Dual colour Laser in a compact and convenient package. Easy Setup with auto-run, sound activation and
14 Channel DMX control.
In the box:
Your Gobo Fireflash should arrive with you in a single carton in good condition. The carton should contain
1 x main unit with bracket, 1 x UK IEC mains lead and 1 x manual.
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event
of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then
check the unit before continuing use.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.
www.avsl.com
151.742UK User Manual
Advertisement
Related Manuals for Qtx Gobo Fireflash
Summary of Contents for Qtx Gobo Fireflash
- Page 1 Caused by misuse of product will not be covered by warranty. Thank you for choosing the QTX Gobo Fireflash LED and Laser Effect Light. A compact and robust metal 4-in-1 light effect, combining 6 moving colour gobos, 3 colour Effect ball, a 20W White Strobe LED and Dual colour Laser in a compact and convenient package.
- Page 2 Caution: Laser radiation Avoid pointing directly towards eyes. Laser output can cause injury if viewed directly. This product is a Class 3B laser and should only be installed and used by persons who are trained in the management of laser radiation and are able to operate in accordance within the guidance given by the Health and Safety Executive (HSE) in HS(G)95: “The Radiation Safety of Lasers used for Display purposes”.
- Page 3 DMX mode: The Gobo Fireflash can be controlled by DMX signal, simply connect the DMX signal source to the DMX input on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping through the DMX out on the unit.
- Page 4 No power Check mains voltage is correct and outlet is switched on (mains) Check IEC lead and fuse (if fuse continually blows, refer to your dealer) Check control panel mode settings No light output Check DMX settings from controller (dimmer levels, blackout etc.) No strobe output Check strobe settings on control panel or from DMX controller No Laser output...