Making Copies; Canceling A Print Job; Copying Photos - Lexmark XM7163 Quick Start Manual

•
If you leave the flash drive in the printer after leaving the
initial USB menu screen, then touch Held Jobs on the
home screen to print files from the flash drive.
Supported flash drives and file types
Notes:
High ‑ speed USB flash drives must support the full ‑ speed
•
standard. Low-speed USB devices are not supported.
•
USB flash drives must support the File Allocation Table (FAT)
system. Devices formatted with New Technology File
System (NTFS) or any other file system are not supported.
Recommended flash drives
Many flash drives are tested and approved for use
with the printer. For more information, contact the
place where you purchased the printer.

Canceling a print job

Canceling a print job from the printer
control panel
1 From the printer control panel, touch Cancel Job or press
on the keypad.
2 Touch the print job you want to cancel, and then touch Delete
Selected Jobs.
Note: If you press on the keypad, then touch Resume to
return to the home screen.
Canceling a print job from the computer
For Windows users
1
Open the printers folder, and then select your printer.
2
From the print queue, select the print job you want to cancel,
and then delete it.
For Macintosh users
1 From System Preferences in the Apple menu, navigate to your
printer.
2 From the print queue, select the print job you want to cancel,
and then delete it.
File type
Documents:
Copying
•
.pdf
•
.xps
Images:
•
.dcx

Making copies

•
.gif
•
.jpeg
or .jpg
Making a quick copy
•
.bmp
•
.pcx 1 Load an original document faceup, short edge first into the
ADF tray or facedown on the scanner glass.
•
.tiff or .tif
•
.png
Notes:
•
.fls
•
Do not load postcards, photos, small items,
transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items
on the scanner glass.
•
The ADF indicator light comes on when the paper is
loaded properly.
2
If you are loading a document into the ADF tray, then adjust
the paper guides.
Note: To avoid a cropped image, make sure the size of the
original document and the size of the copy paper are the
same.
3 From the printer control panel, press
Copying using the ADF
1
Load an original document faceup, short edge first into the
ADF tray.
.
17
Notes:
•
Do not load postcards, photos, small items,
transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items
on the scanner glass.
•
The ADF indicator light comes on when the paper is
loaded properly.
2
Adjust the paper guides.
3
From the home screen, navigate to:
Copy > specify the copy settings > Copy It
Copying using the scanner glass
1 Place an original document facedown on the scanner glass in
the upper left corner.
2 From the home screen, navigate to:
Copy > specify the copy settings > Copy It
If you have more pages to scan, then place the next document
on the scanner glass, and then touch Scan the next page.
3 Touch Finish the Job.

Copying photos

1
Place a photo facedown on the scanner glass in the upper left
corner.
2 From the home screen, navigate to:
Copy > Content > Photo >
3 From the Content Source menu, select the appropriate setting
that best matches the original photo.
4 Touch > Copy It
Note: If you have more photos to copy, then place the next
photo on the scanner glass, and then touch Scan the next
page.
5
Touch Finish the Job.