Advertisement
Available languages
Available languages
Open the door fully.;
6. Lift up and turn the small levers situated on the two hinges, be sure the lockers must be on position shown
on step.1
7. Pull the door towards you, pulling it out of its seat;
8. Push the latch on both side and pull the bar out.
9. Remove the door glass accordingly
10. Assembly the door by following the above procedures backwards.
Replacing the oven lamp
5
Warning: Ensure that the appliance is switched off before replaceing the lamp to avoid the possibility of
electric shock
6
Remove the glass cover of the lamp-holder;
7
Remove the lamp and replace with a lamp resistant to high temperature (300C) with the following
characteristics:
--Voltage:220-240V
--Wattage 25W
--Lamp-holder type: E14
8
Screw the glass cover and reconnect the oven to the mains power supply
25
Advertisement
