Canon iR 2016 User Manual page 82

MEMORY FULL
Cause
Remedy
NO APPROPRIATE SIZE
Cause
Remedy
3
NO CONTROL CARD/INSERT CONTROL CARD
Cause
Remedy
NO DOCUMENT/CHECK FEEDER
Cause
Remedy
OUT OF STAPLES/REPLACE STAPLE CART.
Cause
Remedy
OUT OF TONER/CHANGE TONER
Cause
Remedy
3-8
List of Error Messages
The machine's memory is full of scanned documents.
Divide the original into some stacks and scan them one by one.
Although <AUTO> is selected when copying, paper of suitable size is not set in
the paper drawer nor on the stack bypass.
Select the paper size, or set the copy ratio.
If you press [Start] while this message is displayed, the paper with the least
margin is selected automatically and printing starts.
The control card is not inserted into the card reader.
Insert the control card into the card reader.
No document is loaded in the feeder.
Load a document in the feeder.
There are only few staples remaining in the staple cartridge.
Replace the staple cartridge.
The toner cartridge has run out of toner.
Replace the toner cartridge.