Canon iR 2016 User Manual page 51

The power indicator on the Control Panel lights.
If the power indicator does not light, check if the power plug is firmly inserted into
the power outlet.
The message below is displayed until you can operate the machine.
INITIALIZING...
The screen below is displayed when the machine is ready to scan.
100% AUTO
A TEXT
It takes about 13 seconds (at a room temperature of 20 °C) for the machine to
warm up.
IMPORTANT
If you turn OFF the main power, wait at least 10 seconds before turning the main
power back ON.
NOTE
The standard settings are selected at power ON.
The standard copy settings are as follows:
- Copy Ratio: Direct (100 %)
- Paper Selection: Auto Paper Selection
- Copy Density: Auto Density Control
- Copy Quantity: 1
- Image Quality: TEXT
- Copy Function: One-sided Copy
You can change the standard copy settings. (See the Copying Guide.)
You can reserve a job when the display above appears. (See the Copying Guide.)
O1
Main Power and Control Panel Power
1
1-21