Procedure 7: Updating Skype For Business Room System Software - Smarttech SMART Room System SRS-LYNC-XS Setup Manual

SETUP GUIDE
SMART ROOM SYSTEM WITH SKYPE FOR BUSINESS
b. If the room system is licensed, continue to Procedure 7: Updating Skype for Business Room
System software below.
OR
If the room system isn't licensed, do one of the following:
Wait for the KMS server to allocate a product key to the room system, and then repeat
o
step a.
NOTE
You can continue using the Lync or Skype for Business Room System software during
the trial period.
Select Multiple Activation Key (MAK), type a MAK provided by Microsoft in the Enter a
o
key box, click Activate Key, and then continue to Procedure 7: Updating Skype for
Business Room System software below.

Procedure 7: Updating Skype for Business Room System software

IMPORTANT
You must update Skype for Business Room System software if your room system includes
l
SMART Board 8055i-G5 or 8065i-G5 interactive flat panels and the Lync Room System
software version is earlier than 15.12.02.
If the room system does not have Internet access, configure an HTTP server with current
l
Skype for Business Room System software updates and direct the room system to that
server (see Procedure 5: Configuring Skype for Business Room System software on
page 12).
To update Skype for Business Room System software
a. Click Apply & Restart.
The room system appliance restarts in meeting mode.
b. Click Options, and then press Settings.
The Enter your credentials screen appears.
c. Type the room system administrator account's user name and password in the text boxes, and
then press Authenticate.
The room system restarts.
17 1026558 Rev 03