Procedure 5: Configuring Skype For Business Room System Software - Smarttech SMART Room System SRS-LYNC-XS Setup Manual

SETUP GUIDE
SMART ROOM SYSTEM WITH SKYPE FOR BUSINESS
f. In Control Panel, configure the displays as follows:
IMPORTANT
Align the top of all displays as shown above.
o
Position the console to the right of the interactive flat panels as shown above.
o
TIPS
To determine which display is which, press Identify. Each display's number appears
o
briefly on the display.
If you need to change these settings later, see Forcing a display configuration change
o
in Skype for Business Room System software (kb.smarttech.com/?q=14653).
g. In Control Panel, set the console as the main display by clicking its thumbnail and then
selecting Make this my main display.
h. In Control Panel, click Apply and then click OK.
i. In the dialog box, click OK.
j. If the room system appliance restarts, type the room system administrator account's
password, and then press ENTER.
The Microsoft end user license agreement appears.
k. Read the Microsoft end user license agreement, and then click Accept.
The Skype for Business Admin Console appears.
l. Continue to Procedure 5: Configuring Skype for Business Room System software below.

Procedure 5: Configuring Skype for Business Room System software

NOTE
This procedure documents SMART's recommended configuration of Skype for Business Room
System software. Refer to the Microsoft Lync Room System Deployment Guide
(microsoft.com/download/details.aspx?id=39274) for detailed deployment information.
12 1026558 Rev 03