Smarttech SMART Room System SRS-LYNC-XS Setup Manual page 13

SETUP GUIDE
SMART ROOM SYSTEM WITH SKYPE FOR BUSINESS
To configure Skype for Business Room System software
a. Click Application Settings, and then set the following controls:
Control
Credentials
User Name
SIP URI
Password
Proxy Credentials
Configuration Modes If your organization maintains a mixed environment of Lync 2010,
Quality Control
Logging
13
Procedure
Type the Skype for Business account's full domain name in one of
two formats depending on how your organization's servers are
configured (for example, yourdomain\room1 or
room1@yourdomain.com).
Type the Skype for Business account's Session Initiation Protocol
(SIP) uniform resource identifier (URI)
(for example, room1@yourdomain.com).
NOTE
If the domain name used in the Skype for Business account's SIP
URI is different from the domain name on the Lync or Skype for
Business Web Service certificate, see the SMART Room System
with Skype for Business administrator's guide
(smarttech.com/kb/170819).
Type the Skype for Business account's password.
If the network credentials are the same as the above Skype for
Business account credentials, select Use Skype for
Business Account credentials.
OR
If the network credentials are different from the above Skype for
Business account credentials, select Other credentials, and then
type the network credentials in the User name and Password boxes.
Lync 2013, and/or Skype for Business 2015 server pools, select
Manual, and then type the address of the Lync 2013 or Skype for
Business 2015 server pool in the Internal Server Name box.
Optionally, enable the Customer Experience Program to assist with
troubleshooting.
Optionally, select Full in the drop-down list, and then enable
Windows® Event Logging to assist with troubleshooting.
1026558 Rev 03