Table of Contents
Advertisement
CHAMBERLAIN INTERNET MyQ
Step 1 - Connect & Create
• See the "Chamberlain MyQ
your Chamberlain Internet Gateway to the Internet. Go to mychamberlain.com.au or
mychamberlain.co.nz or download the App to create an account and connect the Internet Gateway.
• You must have a valid email address to create a Chamberlain MyQ
submit, an email will be sent to you to confirm your valid email address. If you do not get a confirming email,
check your spam email folder or try creating the account again, being careful to spell the email address
correctly.
• When the Chamberlain Internet Gateway powers up, the GREEN LED and BLUE LED will blink 3 times to
indicate a correct power connection and reset of the Internet Gateway. After power up, the LEDs will indicate
the status of the Chamberlain Internet Gateway. Refer to the "Gateway Diagnostics/Status LEDs" step for
details regarding the LED indicators.
• If the GREEN LED is off after connecting the Chamberlain Internet Gateway to your router, check the Ethernet
cable connection to your router. It must be in the LAN port, (normally numbered 1 – 4). If the GREEN LED is
still off, try another port on your router. If you still cannot get a solid GREEN LED check your internet is ON,
refer to chamberlaindiy.com.au or chamberlaindiy.co.nz. For further support contact Chamberlain Technical
Support at customerservice@chamberlainanz.com.
Step 2 - Register Chamberlain Internet Gateway & Add Devices
Once you have successfully created your Chamberlain MyQ
Gateway to the account. It is easy to do from a computer or your internet enabled smartphone or tablet. See
step 3 for downloading the Chamberlain MyQ
• To add the Chamberlain Internet Gateway to your account, the GREEN LED on the Internet Gateway must be
on continuously. If the GREEN LED is not continuosly on, see Step 1, Connect & Create. The Chamberlain
Internet Gateway must have an internet connection for the website or phone to find it.
• In the mychamberlain.com.au or mychamberlain.co.nz websites, add the Chamberlain Internet Gateway. Click
on "Manage Places" to add the Internet Gateway. If this is the first Chamberlain Internet Gateway connected to
the account, the screen will already be at the step of "Register Gateway". You will need the SERIAL NUMBER
from the bottom label of the Internet Gateway. The serial number is a series of ten characters, 0 – 9 or a – f.
Be sure to use the correct characters (e.g. a zero "0" instead of an "O") and keep the character spacing
correct (XXXX-XXX-XXX). If this is the second Chamberlain Internet Gateway to be added, just click on
"Manage Places > Add New Place". For instructions on how to complete this step with the Chamberlain MyQ
app, see steps 5 and 6.
• Name the Chamberlain Internet Gateway (e.g., "123 Main Street" or "Home Sweet Home"). Click "Save and
Close" to complete this step.
• You can add MyQ
devices like the garage door opener from the "Manage Places" page, or you can download
®
the Chamberlain MyQ
®
opener, click on "Manage Places>Add New Device" and follow the steps. Once you click ADD you have 3
minutes to go to the garage door opener or device and press itʼs learn button. The Chamberlain Internet
Gateway will pair to the operator. Once a device is programmed, it will appear on the screen. You can then
name the device (e.g., left garage door, etc.).
GATEWAY USERʼS GUIDE
®
Quick Start Guide" for instructions for the connection of
®
app and steps 5 and 6 for using the app.
®
app and add any MyQ
®
account. Enter your information and click
®
account, you must add the Chamberlain Internet
®
device from a smartphone or tablet. To add the garage door
13
®
Advertisement
Table of Contents
