Level the Dryer
1. Leveling the dryer is to prevent undesirable
noise and vibration.
When placing your dryer in an solid and level
area where water is not dripping and freezing,
flammable materials are not stored.
2. If the dryer is not properly level, adjust the front
leveling legs up and down as necessary.
Turn them clockwise to raise and
counterclockwise to lower until the dryer is not
wobbling both front-to-back and side-to-side.
When pushing down the edges of the washing
machine, the machine should not move up and down
at all. (Please, check both of two directions)
If machine rocks when pushing the machine top plate
diagonally, adjust the feet again.