Table of Contents
Advertisement
d. pick one deVice
Press and hold the button on only ONE device until you hear two
beeps. Release button. You will hear "Searching for other devices".
•
The light will pulse and device will sound a continuous "Sonar"
ping until step E is complete.
e. reLaX and Wait
Wait until all devices have connected to network. Once connected,
each device will speak, "Success now connected!"
•
Once connected, the lights will glow green.
F. pick one deVice
Press and hold the button on only ONE device until you hear 2 beeps.
Release button. "Sonar" ping will stop.
•
Device will announce that setup is complete and the number of
connected devices.
G. SetUp coMpLete!
If all devices flash green and "Sonar" ping has stopped, the devices are now connected. Congratulations!
H. proceed to WirinG inStrUctionS in Section 10.
9.2 Adding Another Device to an Existing Wireless Alarm Network
For various reasons, you might want to add additional units to your existing wireless alarm network.
Modifying your existing wireless alarm network is easy and user-friendly.
14
"Searching for
other devices."
Hold for
DON'T press buttons
5 seconds
on other devices
Figure 9.1-C
"Success, now
connected!"
Figure 9.1-D
Hold for
5 seconds
Figure 9.1-E
Advertisement
Table of Contents
