Kidde P4010ACS-WCA User Manual page 15

a. reMoVe tHe neW deVice FroM itS packaGinG.
b. poWer Up neW deVice
Locate the red wheel on the back of the device being added. Turn the
red wheel to the "ON" position using the white activation tool included in
the Quick Start Guide or a standard screwdriver.
•
Once powered, the light ring will glow red.
c. LanGUaGe SeLection
This unit operates in either English or French. To switch your language preference at any time, press the Test
button twice on ALL devices you wish to connect. You should hear one beep for each button press, followed
by a voice message confirming your language selection ("English language selected" or "Langue française
selectionné"). If no language is selected, the voice prompts will continue in the default / set language.
d. pick one inStaLLed deVice
Press and hold the button on ONE INSTALLED device on your network
until you hear two beeps. Release button. You will hear "Searching for
other devices."
•
Light will pulse green and device will sound a continuous "Sonar"
ping until step E is completed.
e. reLaX and Wait
Wait until the new device has connected to the network. Once
connected, the new device will speak, "Success now connected!"
•
Once connected, the light ring will glow green.
USE ACTIVATION
TOOL OR SCREWDRIVER
Figure 9.2-B
"Searching for
other devices."
Installed Device Device Being Added
Figure 9.2-C
"Success, now
connected!"
Figure 9.2-D
15