Installer Setting-Ceiling Height Selection - LG ARUN100LT2 Owners & Installation Manual

Installation instruction
Installer Setting -Ceiling Height Selection
This function is to adjust FAN Airflow rate according to ceilingheight (only cassette model)
<Ceiling Height Selection Table>
Ceiling Height Level
01 Low
02 Standard
03 High
04 Super high
Ceiling height setting is available only for some products.
Ceiling height of 'Super high' function may not exist depending on the indoor unit.
Refer to the product manual for more details.
16 Wide Wired Remote Controller
1 Press
to enter the installer setting
mode until timer segment
display "01:01".
2 Repeat pressing
Function code 05.
Ex) Setting Ceiling Height as 'Standard'.
3 Select ceiling height value by pressing
button.
(01:Low, 02:Standard, 03:High,
04:Super high)
4 Press
5
Press
system will automatically exit
after 25 seconds without any
input.
Decrease the indoor airflow rate 1 step from standard level
Set the indoor airflow rate as standard level
Increase indoor airflow rate 1 step from standard level
Increase indoor airflow rate 2 steps from standard level
button for 4 seconds
button to select
Function Code Ceiling height
button to save or release.
button to exit or
Description