Installer Setting-Test Run Mode - LG ARUN100LT2 Owners & Installation Manual

Installer Setting -Test Run Mode
After installing the product, you must run a Test Run mode.
For details related to this operation, refer to the product manual.
1
2
18˚C cooling, High Fan Speed, Airflow direction mode will be operated during 18 minutes with
ignoring room temperature.
After running 18 minutes under test run mode, system will automatically turn OFF.
In case of duct type, the Airflow UP/DOWN function is not displayed.
During test run mode, receiving signal from wireless remote controller will release this operation.
If you press any kind of button, Test Run mode will be released.
1
Keep pressing
secs to enter installer setting mode until
code displayed in timer segment.
Function Code
2 Press button to start.
Owner's & Installation Manual 11
Installation instruction
button setting for 4
Set