Installer Setting-Group Setting - LG ARUN100LT2 Owners & Installation Manual

Installation instruction

Installer Setting-Group Setting

This function is only for group control operation. Please don't set this function in case of non-group
control.
18 Wide Wired Remote Controller
1 Press button for 4 seconds
to enter the installer setting
mode until timer segment
display "01:01".
2 Repeat pressing
Function code 07.
Function Code
Ex) 'Master' Setting
3 Select Master/ Slave by pressing
button.
(00: Slave, 01: Master)
4 Press button to save or release.
5 Press button to exit or
system will automatically exit
after 25 seconds without any
input.
button to select
Master/Slave value