Installer Setting-How To Enter Installer Setting Mode - LG ARUN100LT2 Owners & Installation Manual

Installer Setting -How to enter installer setting mode
CAUTION
Installer setting mode is to set the detail function of the remote controller.
If the installer setting mode is not set correctly, it can cause problems to the product, user injury or
property damage. This must be set by an certificated installer, and any installation or change that is
carried out by a non-certificated person should be responsible for the results. In this case, free service
cannot be provided.
1
Some contents may not be displayed depending on the product function.
1 Press button for 4 secsonds to enter
the installer setting mode. (When you
enter the setting mode initially, Function
code is displayed on the bottom of the
LCD screen.)
Function Code
2 Repeat pressing
will change with the corresponding
function code.
Test Run Address Setting
Value Thermistor
Static Pressure
Override Setting
Release 3Min. Delay
Convert Temp.
heater Humidifier
Ventilation Kit
Owner's & Installation Manual 9
Installation instruction
Value
button, the menu
E.S.P.
Ceiling Height
Group Setting
Dry Contact
Zone State
Plasma Electric
Elevation Grill