How To Enter Installer Setting Mode - LG PQWRCDF0 Owners & Installation Manual

Installer Setting -How to enter installer setting mode
CAUTION
Installer setting mode is to set the detail function of the remote controller.
If the installer setting mode is not set correctly, it can cause problems to the product, user injury or
property damage. This must be set by an certificated installer, and any installation or change that is
carried out by a non-certificated person should be responsible for the results. In this case, free service
cannot be provided.
Installer Setting Code Table
No. Function
0 Mode Override
2 Group Control
1
With the FAN SPEED button pressed, press the RESET button.
2
By using the TEMPERATURE SETTING button, set function code
and setting value. (Please refer the Installer Setting Code Table.)
Function Code
Setting Code
3
Press the ON/OFF button toward the indoor unit 1 time.
4
Reset the remote controller to use the general operation mode.
Function Code
0 : Set to Master
0
1 : Set to Slave
0 : Set to Master
2
1 : Set to Slave
2 : Check Master/Slave
Setting Value
Owner's & Installation Manual 9
Installation Instruction
Remote Controller LCD