Reading The Wi-Fi Indicator Light - Devolo Magic 2 WiFi next Manual

Before the networking procedure, write down
the Wi-Fi key of the devolo Magic 2 WiFi. You
can find the device's unique key on the label on
the rear side of the housing.
In order to connect the devolo Magic 2 WiFi
with your laptop, tablet or smartphone later via
Wi-Fi, enter the noted Wi-Fi key as the network
security key.
b
In order to switch Wi-Fi off, press and hold the
Wi-Fi button longer than 3 seconds.
b
In order to switch Wi-Fi back on, briefly tap
the Wi-Fi button.
Connecting Wi-Fi devices via WPS
b
If the device is still on factory defaults, tap the
Wi-Fi button in order to activate WPS.
b
If the Wi-Fi connection was switched off and
you would like to activate WPS, press the Wi-
Fi button twice; once to switch Wi-Fi on, and
again to activate WPS.
b
If the Wi-Fi connection is switched on and you
want to copy these settings to another
devolo Magic adapter, continue reading with
the Chapter 4.7.5 Config Sync.
WPS is one of the encryption standards deve-
loped by the Wi-Fi Alliance. The objective of
WPS is to make it easier to add devices to an exi-
sting network. For more detailed information,
refer to Chapter 4.4.7 Wi-Fi Protected Setup
(WPS).

2.3.3 Reading the Wi-Fi indicator light

The integrated Wi-Fi indicator light (LED) shows
the status of the devolo Magic 2 WiFi by illumina-
ting and/or flashing
devolo Magic 2 WiFi next
Introduction 20