Speakers - HP Pavilion 17-AR050WM Maintenance And Service Manual

Speakers

Description
Speakers (includes cables and four rubber isolators)
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the optical drive (see
a. Bottom cover (see
b. Battery (see
c. Fan (see
d. System board (see
Remove the speakers:
1. Release the wireless antenna cables from the retention clips (1) and routing channel built into
the keyboard/top cover and right speaker.
2. Release the display panel cable from the retention clips (2) and routing channel built into
the left speaker.
3. Release the speaker cable from the retention clips (3) and routing channel built into the keyboard/
top cover.
4. Remove the Phillips PM2.0×4.2 screw (4) that secures the right speaker to the keyboard/top cover.
44 Chapter 5 Removal and replacement procedures
Optical drive on page
Bottom cover on page
Battery on page 27)
Fan on page 36)
System board on page
24), and then remove the following components:
25)
37)
Spare part number
933478-001