Ozito PXCSS-165 Instruction Manual

Ozito PXCSS-165 Instruction Manual

165mm
Hide thumbs Also See for PXCSS-165:

Advertisement

165MM
CIRCULAR SAW
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage:
18V
No Load Speed:
4,200/min
Blade Diameter:
165mm (6.5")
Blade Teeth:
24TCT
Blade Bore:
20mm
Depth of Cut:
54mm @ 90°
35mm @ 45°
Weight:
2.59kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specified
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts, for example: cutting blades.
WHAT'S IN THE BOX
Circular Saw
Rip Fence
Hex Key
PXCSS-165
1017

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PXCSS-165 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito PXCSS-165

  • Page 1 54mm @ 90° 35mm @ 45° Weight: 2.59kg ozito.com.au PXCSS-165 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 2: Know Your Product

    BATTERY & CHARGER This tool is compatible with all battery and chargers from the Ozito Power X Change Range. For optimal performance, we recommend the use of a 3.0Ah battery or higher to operate this Power X Change Circular Saw.
  • Page 3: Depth Adjustment

    2. DEPTH ADJUSTMENT 3. BEVEL ADJUSTMENT Bevel Adjustment WARNING! ENSURE THE TOOL IS SWITCHED OFF AND THE BATTERY IS REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING TASKS. 1 Loosen bevel adjustment knob. Depth Adjustment Depth should be adjusted so that no more than one tooth is protruding through the timber.
  • Page 4 4. CONTROLS Worklight Turning On and Off The worklight provides additional 1 Press and hold the lock-off lever light while operating to help you see in either direction. what you are cutting. 1 Pressing the lock- 2 Squeeze the on/off off lever in either trigger to start the direction to switch...
  • Page 5: Operation

    6 Depress spindle lock and Tighten material to perform the cut. bolt. blade bolt with the hex key. Once complete, release the on/ off trigger and remove the saw from the work piece. Note: Never force the saw. Use light and continuous pressure. PXCSS-165...
  • Page 6: Maintenance

    Worklight is not turning on Note: Ozito Industries will not be responsible for any damage or injuries The worklight only turns on once the lock-off lever is pressed towards either side of the caused by the repair of the circular saw by an unauthorised person or by mishandling handle.
  • Page 7: Description Of Symbols

    Check with your local council authority for recycling advice. For further information, or any parts not listed here, visit www.ozito.com.au or contact Ozito Customer Recycling packaging reduces the need for landfill and raw materials. Reuse of recycled material decreases pollution in the environment.
  • Page 8: Electrical Safety

    Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. The power supply for this products charger should be protected by a residual current device (rated at 30mA or less). A residual current device reduces the risk of electric shock.

Table of Contents