Ozito PXCSS-165 Instruction Manual
Hide thumbs Also See for PXCSS-165:

Advertisement

Quick Links

165MM
CIRCULAR SAW
INSTRUCTION MANUAL
SPECIFICATIONS
Input:
18V
No Load Speed:
4,200/min
Blade Diameter:
165mm (6.5")
Blade Teeth:
24TCT
Blade Bore:
20mm
Depth of Cut:
54mm @ 90°
35mm @ 45°
Weight:
2.59kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specified
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO INDUSTRIES PTY. LTD.
WARRANTY
25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
STANDARD EQUIPMENT
Circular Saw
Rip Fence
Hex Key
PXCSS-165
1121

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PXCSS-165 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito PXCSS-165

  • Page 1 • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria, Australia 3175. 1121...
  • Page 2: Know Your Product

    This tool is compatible with all batteries & chargers from the Ozito PXC range. For optimal performance, we recommend the use of a 3.0Ah battery or higher to operate this PXC tool.
  • Page 3 2. FITTING A BLADE 3. CUTTING ADJUSTMENTS WARNING! WARNING! ENSURE THE TOOL IS SWITCHED ENSURE THE TOOL IS SWITCHED OFF AND THE BATTERY IS REMOVED BEFORE OFF AND THE BATTERY IS REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING TASKS. PERFORMING ANY OF THE FOLLOWING TASKS. WARNING! INSPECT THE BLADES BEFORE EACH Depth Adjustment...
  • Page 4: Operation

    OPERATION 4. CONTROLS Bevel Adjustment Turning The Tool On & Off 1. Loosen the bevel adjustment 1. Press and hold the safety lock-off lever. button in either direction. 2. Align the baseplate to the desired angle on the bevel scale. 2.
  • Page 5: Making A Cut

    5. Move the saw through the material to perform the cut. Once complete, release the on/off trigger and remove the saw from the workpiece. Note: Never force the saw; allow the tool to do the work. Use light and continuous pressure whilst cutting. PXCSS-165...
  • Page 6: Troubleshooting

    6. TROUBLESHOOTING Usage Tips Worklight does not turn on 1. Always hold the rear handle with The worklight only illuminates once the lock-off button is pressed to either one hand and the front handle side of the handle. with the other. Ensure that the light source is not covered in dust.
  • Page 7: Maintenance

    Power tools that are no longer usable should not be disposed of with household waste but in an environmentally friendly Note: Ozito Industries will not be responsible for any damage or way. Please recycle where facilities exist. Check with your local injuries caused by repair of the tool by an unauthorised person or by council authority for recycling advice.
  • Page 8: Electrical Safety

    30mA or less). A residual current device reduces the risk of electric shock. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. GENERAL POWER TOOL SAFETY WARNINGS WARNING! second.

Table of Contents