Table of Contents
Advertisement
Quick Links
CORDLESS
PRUNING
SAW
12V Lithium Ion
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage:
12V
Stroke Length:
20mm
No Load Speed:
0-2700SPM
Battery:
1.5Ah Li-ion
Charge Time:
1 Hour
Max. Cutting Diameter:
60mm (with clamping jaw)
80mm (w/o clamping jaw)
Weight:
1.40 kg
ozito.com.au
WHAT'S IN THE BOX
Cordless Pruning Saw
Clamping Jaw
3 x Cutting Blades
Battery Charger & Battery
PRS-012
Advertisement
Table of Contents
Related Manuals for Ozito PRS-012
Summary of Contents for Ozito PRS-012
- Page 1 Clamping Jaw Voltage: Stroke Length: 20mm No Load Speed: 0-2700SPM Battery: 1.5Ah Li-ion Charge Time: 1 Hour Max. Cutting Diameter: 60mm (with clamping jaw) 80mm (w/o clamping jaw) 3 x Cutting Blades Weight: 1.40 kg ozito.com.au Battery Charger & Battery PRS-012...
-
Page 2: Know Your Product
KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS PRUNING SAW 1. ASSEMBLY 1 Cutting Blade 5 Clamping Jaw Release 2 Clamping Jaw 6 Safety Switch WARNING! ENSURE THE BATTERY IS DISCONNECTED 3 Shoe 7 Variable Speed Trigger FROM THE TOOL BEFORE PERFORMING ANY OF THE FOLLOWING OPERATIONS. - Page 3 2. CUTTING BLADES Removing the Clamping Jaw CAUTION! DO NOT HANDLE BLADES WITHOUT GLOVES AS THEY ARE SHARP AND CAN BECOME HOT AFTER USE, POTENTIALLY CAUSING PERSONAL INJURY. 1 Press and hold the Fitting a Cutting Blade clamping jaw release The pruning saw can be fitted with standard reciprocating saw blades, into the unlock therefore can be used to cut various timbers and plastics.
-
Page 4: Operation
Note: It will take 4-5 charging cycles before the battery reaches optimum charge and run time. PRS-012... -
Page 5: Maintenance
The blade can be sprayed with light oil to avoid rusting. Variable speed trigger is locked Note: Ozito Industries will not be responsible for any damage or Ensure that the safety switch is pressed left or right to enable the trigger injuries caused by repair of the pruning saw by an unauthorised to be pressed. - Page 6 Tool: Cordless Pruning Saw SPARE PARTS Model No. PRS-012 The following is a list of spare parts carried by Ozito. Please contact Customer Service for any parts not listed. Item Item Description Part No. Description Part No. How To Order Available spare parts can be ordered through the Special Orders Desk at any Bunnings Warehouse.
-
Page 7: Electrical Safety
ELECTRICAL SAFETY WARNING! The power supply for this products charger should be protected by a residual current device (rated at 30mA or When using mains-powered tools, basic safety precautions, including the less). A residual current device reduces the risk of electric shock. following, should always be followed to reduce risk of fire, electric shock, personal injury and material damage. -
Page 8: Warranty
• Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 1214...
Need help?
Do you have a question about the PRS-012 and is the answer not in the manual?
Questions and answers