Ozito PXCMSS-210 Instruction Manual

Ozito PXCMSS-210 Instruction Manual

210mm mitre saw

Advertisement

Quick Links

210MM
MITRE SAW

INSTRUCTION MANUAL

SPECIFICATIONS

Voltage:
18V
No Load Speed:
3,000/min
Blade Diameter:
210mm (8
1/4
Blade Teeth:
40TCT
Blade Bore:
30mm
Cutting Capacity:
0° Mitre x 0° Bevel:
120x60mm
45° Mitre x 0° Bevel: 83x60mm
0° Mitre x 45° Bevel: 120x34mm
45° Mitre x 45° Bevel: 83x34mm
Weight:
9.3kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specified
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
")
WARRANTY
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts, for example: cutting blades.
WHAT'S IN THE BOX
Compound Mitre Saw
Dust Bag
Material Clamp
Hex Key
PXCMSS-210
1117

Advertisement

Table of Contents
loading

Summary of Contents for Ozito PXCMSS-210

  • Page 1: Instruction Manual

    45° Mitre x 45° Bevel: 83x34mm Weight: 9.3kg Hex Key ozito.com.au PXCMSS-210 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 2: Know Your Product

    Side View knobs. BATTERY & CHARGER This tool is compatible with all battery and chargers from the Ozito Power X Change Range. 3 The large screw can be lowered For optimal performance, we recommend the use of a 3.0Ah battery or onto the timber workpiece in higher to operate this Power X Change Mitre Saw.
  • Page 3: Bevel Adjustment

    2. EXTENSION SUPPORTS 3. ADJUSTMENTS Bevel Adjustment WARNING! ENSURE THE TOOL IS SWITCHED OFF AND THE BATTERY IS REMOVED BEFORE PERFORMING ANY 1 Loosen bevel locking lever at the OF THE FOLLOWING TASKS. rear of the saw. Adjusting the Extension Supports The extension supports can be extended outwards allowing additional support when cutting longer workpieces.
  • Page 4: Fence Adjustment

    4. CONTROLS Fence Adjustment Turning On the Worklight or Laser Line To switch the worklight on, press To switch the laser line on, press 1 Make sure that no part of the the worklight switch up into the on the laser line switch up into the on tool contacts the upper fence position.
  • Page 5: Operation

    Note: Never force the saw. Use light and continuous pressure. 100 120 140 160 180 CAUTION! FOR ALL TYPES OF CUTS ENSURE THE SAW IS LOCKED INTO POSITION. PXCMSS-210...
  • Page 6: Changing The Blade

    7. CHANGING THE BLADE 8. SAW ALIGNMENT WARNING! ENSURE THE TOOL IS SWITCHED OFF AND The mitre saw should be set-up fairly accurate out of the box, but if the saw DISCONNECTED FROM THE POWER SUPPLY BEFORE becomes misaligned, you can follow the instructions below to adjust the tool. PERFORMING ANY OF THE FOLLOWING TASKS.
  • Page 7: Maintenance

    DO NOT store or use the tool and battery pack in locations where the temperature may reach or exceed Note: Ozito Industries will not be responsible for any damage or injuries 40ºC (such as inside sheds or metal buildings in summer).
  • Page 8: Electrical Safety

    Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. The power supply for this products charger should be protected by a residual current device (rated at 30mA or less). A residual current device reduces the risk of electric shock.

Table of Contents