Table of Contents
Advertisement
2 Preparation to Print
2.8
Attaching the Belt Clip
The printer can be attached to the waist belt with a Belt Clip.
Below are recommendations how to attach the Belt Clip:
How to attach it
1. Please remove the screw for the Belt Clip on the back of the
printer.
2. Please tighten the screw of the Belt Clip after setting it in the
desired direction.
Important
-
If the Belt Clip is misaligned, it cannot be installed correctly.
-
There are two tapped holes in the Belt Clip. The hole which is used depends
on the desired direction clip.
24
Advertisement
Table of Contents
