Page 2
Assembly Instructions 2/5 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. The unit must be level to work properly.
Page 3
Assembly Instructions 3/5 Figure 4 Flat Washer Spring Washer Head Cap Bolt STEP 3 Attach Side Panel (B) to unit with Flat Washers, Spring Washers and Head Cap Bolts, then flip the Locks. (See Figure 4) STEP 4 Attach Back Stretcher (G) to unit, then flip the Lock.
Page 4
Assembly Instructions 4/5 Figure 5 Figure 6 Figure 7 Figure 8 STEP 5 Attach Top (A) to the unit with Flat Washers, Spring Washers and Head Cap Bolts, then flip the Lock. Insert Adjustable Pins into side panels and middle panel at the desired level. (See Figure 5) Place Shelves (J) and (K) into position.
Assembly Instructions 5/5 IMPORTANT To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly. STEP 6 Anchor in wall Wall Screw Pre-drilled hole Bracket on wall at top of unit Place unit at desired location.
Page 6
Buff with a dry clean cloth. Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized retail affiliate, Home Styles is under no obligation to provide replacement parts.