Omron VX Series Manual page 3

VX
Characteristics
Item
Operating speed
Operating frequency
Insulation resistance
Contact resistance (initial value)
Dielectric strength (see note 2)
Vibration resistance (see note 3)
Shock resistance (see note 3)
Durability (see note 4)
Degree of protection
Degree of protection against
electric shock
Proof tracking index (PTI)
Ambient operating temperature
Ambient operating humidity
Weight
Note: 1. The data given above are initial values.
2. The value for dielectric strength shown is for models with a Separator.
3. For the pin plunger models, the above values apply for use at both the free position and total travel position. For the lever models,
they apply at the total travel position. Contact opening or closing time is within 1 ms.
4. For testing conditions, contact your OMRON sales representative.
Approved Standards
Consult your OMRON sales representative for specific models with
standard approvals.
UL1054 (File No. E41515)/CSA C22.2 No. 55 (File
No. LR21642)
Rated voltage
125 VAC 5 A
250 VAC 5 A
30 VDC ---
Contact Specifications
Contact
Inrush current
Minimum applicable load (see note)
Note: For more information on the minimum applicable load, refer to Using Micro Loads on page 132.
Contact Form
SPDT
128
0.1 mm to 1 m/s (pin plunger models)
Mechanical: 600 operations/min max.
Electrical: 30 operations/min max.
100 MΩ min. (at 500 VDC)
30 mΩ max.
1,000 VAC, 50/60 Hz for 1 min between terminals of same polarity
1,500 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground
1,500 VAC, 50/60 Hz for 1 min between each terminal and non-current-carrying metal parts
Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Destruction: 400 m/s
Malfunction: 100 m/s
Mechanical: 50,000,000 operations min.
(60 operations/min)
(Refer to the following Engineering Data.)
Electrical: 500,000 operations min.
(30 operations/min)
(Refer to the following Engineering Data.)
IEC IP40
Class I
175
–25°C to 80°C (at ambient humidity of 60% max.) (with no icing)
85% max. (for 5°C to 35°C)
Approx. 6.2 g (pin plunger models)
VX-5 VX-01
0.1 A
---
0.1 A
Item
Specification
Material
Gap (standard value)
NC
NO
SPST-NC
VX-5
50 mΩ max.
2
{approx. 40G} max.
2
{approx. 10G} max.
Mechanical: 10,000,000 operations min.
(60 operations/min)
(Refer to the following Engineering Data.)
Electrical:
(30 operations/min)
(Refer to the following Engineering Data.)
EN61058-1 (File No. 124761, VDE approval)
Rated voltage
125 VAC
250 VAC
Testing conditions: 5E4 (50,000 operations), T105 (0°C to 105°C)
VX-5
Rivet
Silver alloy
0.5 mm
15 A max.
---
160 mA at 5 VDC
SPST-NO
VX-01
1,000,000 operations min.
VX-5 VX-01
5 A 0.1 A
5 A ---
VX-01
Crossbar
Gold alloy
---
---
1 mA at 5 VDC
VX