Table of Contents
Advertisement
CUSTOM SETTINGS
Bootlogo
You have the possibility to customize the bootlogo (startup logo) to your liking. Please refer to the
following instructions.
38
1.
Create an image file which has 800 x 480 pixels in size is
and has a minimum resolution of 72 dpi.
2.
Save this as „LOGO.BMP" (Windows Bitmap 24-bit).
3.
Format an MicroSD card (max. 32GB) with the FAT32 file
system. Rename the card as „X1_UPDATE".
4.
Copy the image file from your PC to the SD card. It must
be located in no folder.
5.
Insert the SD card into the ESX device and restart the
device by pressing the reset button. The device now
automatically installs the desired boot logo.
6.
Remove the SD card and restart the unit by pressing
again the reset button.
Advertisement
Table of Contents
