Bluetooth - ESX Vision Naviceiver VN720 HY-iX35 Owner's Manual

Hide thumbs Also See for Vision Naviceiver VN720 HY-iX35:

Table of Contents

BASIC FUNCTIONS

BLUETOOTH™

Open the Bluetooth™ application by tapping „Bluetooth" in the main menu.

Select your device from the device list in the phone and enter the PIN code 1234. Alternatively, you can also

search your mobile phone under „Devices" and connect to the device. Once you have connected your phone

to the device, the pairing starts automatically as soon as the two devices are within range. Leave Bluetooth

activated on the mobile phone. If a mobile phone has already been added to the list of Bluetooth devices, you

can also manually pair the devices. The range for a satisfactory connection is about 10 m.

DISCONNECT

To disconnect the two Bluetooth

devices, tap on „Devices".

Alternatively, the phone can also be deleted from the list, but after that, the automatic pairing is disabled and

the mobile phone must be re-paired with the device. To delete the mobile phone from the list, select the name

and press „Delete". This is only possible if the devices are not currently paired.

The paired mobile phone has always priority and a phone call mutes always the

Sollte ein Mobiltelefon per Bluetooth mit dem Gerät verbunden sein, hat dieses Pri-

currently playback of media (navigation, radio, audio, DVD, etc.). This applies both

orität sollte ein Anruf erfolgen und schaltet während des Telefonats die Medienwie-

for incoming calls as well as outgoing calls.

dergabe (Radio, Audio, DVD etc.) stumm.

PAIRING

At first pair the devices, if necessary refer to the manual of your

mobile phone. Open the „Settings" menu on your mobile phone

and open the Bluetooth settings.

Turn on Bluetooth and then search for compatible devices. The

Bluetooth name of the device will be displayed.

Choose the mobile phone from the list and tap „Dis-

connect" or quit the Bluetooth connection on your

phone.

Table of Contents