A2Dp - ESX Vision Naviceiver VN720 HY-iX35 Owner's Manual

A2DP

(optional)
Once a Bluetooth device is (mobile phone, computer, tablet)
coupled via Bluetooth, which works with the streaming A2DP
standard, there is the possibility, to playback audio stream
over the ESX device. Connect this device as described on page
14and select a music source A2DP under Apps.
If the message „A2DP is not connected" appears, your BT
device it is not connected or the audio playback is not (yet)
enabled. Check the Bluetooth device and if the appropriate
settings for the audio streaming are correct. Then, disconnect
the device and connect it again. If the message „A2DP is not
connected" appears again, the Bluetooth device does not sup-
port the A2DP standard.
Start playback of the desired music on the Bluetooth device or
with the keypad „>|I" on the touch screen. If you play a playlist,
you can use also the keypad „|<<" and „>>|" on the touch
screen, respectively the „SEEK + / SEEK" buttons or the rotary
control on the ESX device to select the desired title.
BASIC FUNCTIONS
21