Table of Contents
Advertisement
SAFETY
SAVE THESE SAFETY INSTRUCTIONS
FOR FUTURE REFERENCE
SAFETY INFORMATION
(READ THOROUGHLY)
The TORNADO BOAT LIFT was designed, tested and certified to
be installed in the recommended area approved by certified
and approved personnel under the specific installation and
operation guidelines laid out in the installation and operation
manuals issued by GOLDEN BOAT LIFTS.
Note: Any installation or operation methods outside the
guidelines described within the manual(s) mentioned above
will void the product warranty.
Note: Only a trained and certified service provider should
install the Tornado boat Lift.
Note: Before beginning installation of the Tornado Boat Lift,
please ensure that the area selected for installation meets all
local and state guidelines and regulations.
Note: To avoid damage to the Tornado Boat Lift and/or personal
injury/death, carefully follow each step outlined in the
manual(s).
Note: Before beginning installation of the Tornado boat Lift,
clear adequate space around the installation site so that all
parts, hardware, and tools can be laid out in a safe and
organized fashion.
!
caution
HEAVY OBJECTS
Failure to follow this warning can result in personal injury or
death and/or damage to the Tornado Boat Lift.
The Tornado Boat Lift has many heavy parts. To avoid bodily
harm and/or damage to the Tornado Boat Lift, ensure that
proper handling and lifting techniques are used.
Note: Machinery may be required to move individual parts
and/or finished product.
When completing the steps outlined in this Installation Manual,
please ensure that only proper handling and lifting techniques
are used to transport parts to desired locations. In some
circumstances, machinery may be required to move individual
parts.
!
SAVE THESE INSTRUCTIONS
3
The Tornado Boat Lift comes with a 12V DC Double-Acting
Hydraulic Power Unit (SPX Stone Hydraulic Power unit) which
provides the power for operation of the Tornado Boat Lift.
Note: After installation of the Tornado Boat Lift, please
reference the HYDRAULIC POWER PACK INSTALLATION
MANUAL provided to continue installation of the power supply
for the Tornado Boat Lift. Failure to reference and follow these
instructions before attempting to operate the Tornado Boat Lift
may cause damage to the lift and/or personal injury/death.
!
WARNING
MOVING PARTS HAZARD
Failure to follow this warning can result in personal injury or
death and/or damage to the Tornado Boat Lift.
The Tornado Boat Lift has many moving parts while in operation.
To avoid bodily harm and/or damage to the Tornado Boat Lift,
ensure the lift is operated from a safe distance, and never on
the lift or boat.
Note: Never operate a lift while on the lift or
inside the boat.
After completing the steps outline in the TORNADO
INSTALLATION MANUAL and the HYDRAULIC POWER PACK
INSTALLATION MANUAL, the Tornado Boat Lift should be ready
to operate.
Note: Before operation, it is important to verify that every step
outlined in the TORNADO INSTALLATION MANUAL and the
HYDRAULIC POWER PACK INSTALLATION MANUAL has been
correctly completed.
To operate the Tornado Boat Lift, please reference the
TORNADO BOAT LIFT OPERATING MANUAL.
Note: Never Exceed the maximum capacity of the lift.
Note: Never go under the lift or boat, especially when the lift
is in the raised position. Never operate a lift while on the lift
or inside the boat.
Note: It is recommended that the Tornado Lift be raised to the
upward position after removing the boat, indicating a hidden
underwater obstruction for others.
!
Advertisement
Table of Contents
