Table of Contents
Advertisement
MOUNT HYDRAULIC CYLINDER
Note: Ensure Hydraulic Cylinder is oriented so that the lower
mounting hole is facing downward.
1.
Align the lower Hydraulic Cylinder mounting hole with the
corresponding holes on the Lower Cylinder Mount as shown
in Figure 13.
2.
Insert one (1) 1" Cylinder Pin into the cylinder hinge plate
through the Hydraulic Cylinder lower mounting hole as
shown in Figure 13.
3.
From the inside of the hinge plate, insert one (1) 3/8" Hex
Bolt through the hinge plate and the lower hole on the
Cylinder Pin.
4.
Attach one (1) 3/8" Lock Washer and one (1) 3/8" Hex Nut to
the protruding end of the Hex Bolt and fasten with
appropriate wrench until secure as shown in Figure 13.
5.
Repeat these steps for the remaining seven (7) Hydraulic
Cylinders.
PARTS REQUIRED TO MOUNT HYDRAULIC
3/8" x 1-1/2" Hex Bolt (8)
3/4" Cylinder Pin (8)
14
CYLINDER(S)
Hydraulic Cylinder (8)
3/8" Lock Washer (8)
3/8" Hex Nut (8)
Figure 13
Advertisement
Table of Contents
