Using The Dust-Away Hard Floor Attachment; Lift-Away ® Cleaning - Shark NV581Q Series Manual

USING THE DUST-AWAY HARD FLOOR ATTACHMENT
™
Pick up debris and wipe away fine dust in one easy step.
Wand Release
Dust-Away Hard Floor
Attachment
1 To attach the microfiber pad, slip two of the tabs between the suction nozzle and
the duster base and attach them to the front fasteners on the base. Then pull the
other two tabs tightly around to the back fasteners on the base. For best results,
ensure that the pad is flat against the bottom surface and secured tightly.
2 Press the Wand Release button to remove the wand from the motorized floor
nozzle.
3 Press the Lift-Away button to remove the pod from the motorized floor nozzle.
4 Insert the wand into the Dust-Away Hard Floor Attachment.
NOTE: For best results, ensure that the Suction Control is set to MAX.
NOTE: Use the Dust-Away Hard Floor Attachment to clean dry, bare floor surfaces
only. Dust-Away Hard Floor Attachment should always be used with the microfiber
pad.
7
LIFT-AWAY CLEANING
®
Leave the nozzle behind for an easy and portable clean.
1
Attach the desired accessory directly into the handle.
2 For an extended reach, attach the desired accessory into the wand.
w w w . S h a r k C l e a n . c o m
OR
OR