USING THE DUST-AWAY
HARD FLOOR ATTACHMENT
IMPORTANT: Do not
use the Dust-Away Hard
Floor Attachment without
the Microfiber Pad.
NOTE: Both power
settings provide the
same suction power.
TIP: You can attach the
handheld vacuum directly
to the motorized floor
nozzle for convenient
stair cleaning.
MICROFIBER PAD CARE
Machine or hand wash the
pads separately in warm water
with liquid detergent.
Do not use bleach or fabric
softeners as they may damage
the pads or leave a coating
that will reduce their cleaning
performance.
Tumble dry low or line dry
to extend the life of the
microfiber fabric.
For the best results, replace
your microfiber pads every 3
to 4 months.
11
1-800-798-7398
™
STEP 1
1
Slip two tabs between
the nozzle and the duster
base and attach them to
the front fasteners.
STEP 2
2 Pull the other two tabs
tightly around to the back
fasteners. Ensure the pad
is flat against the bottom
surface and tightly secured.
Slide the power switch to
either setting to clean hard
floors. Do not use to clean
damp floors or wet/sticky
messes. Use only pads
provided by Shark.