Checking Wheel Bolt Torque - Kubota M108DC Operator's Manual

78 PERIODIC SERVICE
(3) If the buzzer does not sound, shut off the engine
and consult your local KUBOTA Dealer for
immediate servicing of the PTO OPC.
7. If the PTO OPC is operating properly, shut off the
engine, and reconnect the implement drive shaft to the
PTO. Restart the engine per the available instructions.
To avoid personal injury or death:
A Before checking the PTO OPC, make sure that
the PTO drive shaft should be disconnected
from the tractor.
A If the buzzer does not sound during the PTO
OPC check procedure, shut off engine and
consult your local
immediate servicing of the PTO OPC.
A The unit should not be operated until servicing
is completed.
(1) Main gear shift lever
(2) Clutch pedal
(3) PTO clutch control lever
KUBOTA Dealer for
BChecking Wheel Bolt Torque
To avoid personal injury or death:
A Never operate tractor with a loose rim, wheel,
or axle.
A Any time bolts and nuts are loosened, retighten
to specified torque.
A Check all bolts and nuts frequently and keep
them tight.
Check wheel bolts and nuts regularly especially when
new. If they are loose, tighten them as follows.
(1), (2), (3)
260 to 303
(26.5 to 31.0)
N-m (kgf-m)
(4)
343 to 401
(35.0 to 41.0)