Rear Wheels - Kubota M108DC Operator's Manual

52 TIRES, WHEELS AND BALLAST
BRear Wheels
Rear tread width can be adjusted as shown with the
standard equipped tires.
To change the tread width
1. Remove the wheel rim and / or disk mounting bolts.
2. Change the position of the rim and / or disk (right and
left) to the desired position, and tighten the bolts.
A Always attach tires as shown in the drawings.
A If not attached as illustrated, transmission parts may
be damaged.
A When re-fitting or adjusting a wheel, tighten the bolts
to the following torques then recheck after driving the
tractor 200m (200yards) and thereafter according to
service interval.
(See "MAINTENANCE" section.)
(1) 260 to 304 N-m (26.5 to 31.0 kgf-m)
(2) 343 to 401 N-m (35.0 to 41.0 kgf-m)