Drawbar; Adjusting Drawbar Length; Swing Drawbar - Kubota M108DC Operator's Manual

Table of Contents

Advertisement

42
3-POINT HITCH & DRAWBAR

DRAWBAR

To avoid personal injury or death:
A Never pull from the top link, the rear axle or any
point above the drawbar. Doing so could cause
the tractor to tip over rearward causing
personal injury or death.
BAdjusting Drawbar Length
When towing an implement, it is recommended that the
(A) hole in drawbar be utilized.
The drawbar load is specified in the "IMPLEMENT
LIMITATIONS" section.
(1) Drawbar
Holes: (A), (B)
(2) Drawbar pin
BSwing Drawbar
The drawbar can be used in 3 different ways as illustrated
below. Assemble it correctly with drawbar pins.
(1) Drawbar
(2) Drawbar pin
(3) Looseness preventing bolt

Advertisement

Table of Contents
loading

This manual is also suitable for:

M108s

Table of Contents