Control Panel; Operation - Kubota M108DC Operator's Manual

BControl Panel
(1) Mode switch
(2) Temperature control dial
(3) Blower switch
(4) Air conditioner switch with indicator light
C Mode switch
Set the mode switch to the desired position.
Air is blown from only the face air outlets.
Air is blown from the front, face and door air outlets.
Air is blown from the front and door air outlets.
C Temperature Control Dial
Set this dial at the desired position to obtain the optimum
air temperature. Turn the dial in the "WARM" direction to
obtain warmer air. Turn it in the "COOL" direction to obtain
cooler air.
C Blower Switch
Air volume can be changed in 3 steps. At the "3" position,
the largest air volume is obtained.
C Air Conditioner Switch
Push this switch to activate the air conditioner. An
indicator light will light up when the switch is set to "ON".
Push the switch again to turn the air conditioner off, in
which case the indicator light will be off.
A With the blower switch at the "OFF" position, the
indicator light will not light up even when the air
conditioner switch is set to "ON".
A To operate the air conditioner after the tractor has not
been used for one week or longer, run the engine at
idling speed first and then set the air conditioner switch
to "ON". Keep this for one minute or so.
If the air conditioner switch is set to "ON" with the
engine running at high rpm, the compressor may get in
trouble.
BOperation
C Heating
1. Set the mode switch to the
2. Set the recirculation / fresh air selection lever to the
"FRESH AIR" position. To raise the temperature in the
CAB quickly, set this lever to the "RECIRCULATION"
position.
3. Adjust the blower (1/2/3) switch and the temperature
control dial to achieve a comfortable temperature
level.
(A) "WARM"
(B) "COOL"
(1) Mode switch
(2) Blower switch
(3) Temperature control dial
CAB OPERATION
, or position.
61