Implement Limitations - Kubota M108DC Operator's Manual

6

IMPLEMENT LIMITATIONS

IMPLEMENT LIMITATIONS
The KUBOTA Tractor has been thoroughly tested for proper performance with implements sold or approved by KUBOTA.
Use with implements which are not sold or approved by KUBOTA and which exceed the maximum specifications listed
below, or which are otherwise unfit for use with the KUBOTA Tractor may result in malfunctions or failures of the tractor,
damage to other property and injury to the operator or others. [Any malfunctions or failures of the tractor resulting from use
with improper implements are not covered by the warranty.]
Tread (max. width)
Front
without spacer with spacer
1690 mm
Implement weight: W 1
and / or size
As in the following list
(Shown on the next page)
Lower link end max,
hydraulic lifting capacity...................................W 0
Implement weight.............................................The implement's weight which can be put on the lower link: W 1
Max. drawbar load............................................W 2
Trailer loading weight.......................................The max. loading weight for trailer (without trailer's weight): W 3
A Implement size may vary depending on soil operating conditions.
*1 It depends on the trailer braking system.
See the decal on the drawbar hitch bracket.
Rear
2050 mm 2035 mm
Max. drawbar Load:
Operating condition
A Tractor with front spacer
option is not approved for
use with front loader.
Actual figures
W 2
1500 kg
Lower link end max. lifting
capacity: W 0
2500 kg
Trailer loading weight: W 3
Max. capacity
7000 kg *1