Adjusting Parking Brake Lever - Kubota M108DC Operator's Manual

C Checking the brake pedal stroke
Pedal stroke Less than 100 mm at each pedal
1. Disengage the brake pedal lock.
2. Step on the right-hand pedal and measure the level
difference (pedal stroke) between this pedal and the
left-hand pedal.
3. Do the same for the left-hand pedal.
(1) Brake pedal (LH)
(2) Brake pedal (RH)
(3) Brake pedal lock
C Checking the equalizer working level
(anti-imbalance device)
1. Gently step on both brake pedals at once.
2. Further step on the right-hand pedal (the left-hand
pedal slightly raises itself) and measure the level
difference between the pedals.
3. Do the same for the left-hand pedal.
Equalizer working Level difference of over 10 mm
level between both pedals
(A) "PEDAL STROKE"
BAdjusting Parking Brake Lever
Proper parking brake
2 notches (Ratchet sound 2).
lever free travel
1. Raise the parking brake lever to the parking position
while counting the ratchet sound made by the parking
brake lever.
2. If adjustment is needed, loosen the lock nut and adjust
the parking brake cable length with in acceptable limit.
3. Retighten the lock nut.
(1) Parking brake lever
(2) Lock nut
PERIODIC SERVICE 83