Specifications - Pintek DP-16VF Instruction Manual

SPECIFICATIONS:

(1) Bandwidth: DC - to 150 MHz (-3 dB)
(2) Attenuation: x400, or x4000 (16VF)
(3) Accuracy: 2%
(4) VoltageInputRanges (DC + AC peak to peak):
DP-16VF
≦1.6KVp-p for x 400,(i.e about 565 V RMS or 800V DC)
≦16KVp-p for x 4000, (i.e about 5650V RMS or 8KV DC)
DP-08VF
≦80Vp-p for x 20,(i.e about 28.3 V RMS or 40V DC)
≦800Vp-p for x 200, (i.e about 283V RMS or 400V DC)
DP-02VF
≦8Vp-p for x 2,(i.e about 2.8 V RMS or 4V DC)
≦80Vp-p for x 20, (i.e about 28V RMS or 40V DC)
(5) Permitted Max Input Voltage: (in DP-16VF)
Max differential voltage: 16KV (DC + AC peak to peak)
Max voltage between each input terminal and ground: 2825V RMS
(6) Input Impedance: 10 MΩ // 10 pF each side to ground
(7) Output: ≦2.0 Vfor 50Ω input oscilloscope
(8) Output Impedance: 50 Ω
(9) Rise Time: 4 ns
(10) Rejection Rate on Common Mode:
60 Hz: ＞80 dB ; 100 Hz: ＞60 dB ; 1 MHz: ＞50 dB
(11) Power Supply: External 5 V DC power supply.
(12) Consumption: 500 mA about (5V DC)
x20, or x200
x2, or x20
(08VF)
(02VF)
7