fantastic furniture Como Bed Head Double Manual page 5

Step 1
You will need
2 x Cam Bolts Phillips head
(H3) screwdriver
Attach 2 x Cam Bolts (H3) into Side Panels (P2, P3) as shown.
Step 2
You will need
4 x Dowels
2 x Cam Nuts
(H1) (H4)
Phillips Head
Screwdriver
Insert 4 x Dowels (H1) into the holes of Back Panel (P5).
Insert 2 x Cam Nuts (H4) into the holes of Back Panel (P5).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Side Panels (P2, P3) to Back Panel (P5), then tighten the cam nuts using a Phillips
Head Screwdriver.
Step 3
You will need
6 x Dowels 5 x Cam Bolts
(H1) (H3)
Phillips Head
Screwdriver
Insert 6 x Dowels (H1) into the holes of Top Panel (P1).
Attach 5 x Cam Bolts (H3) into Top Panel (P1) as shown.
fantasticfurniture.com.au
Raw Edge
H1
(P2)
H1
H3
H1
H1
H3
(P2)
(P5)
This is how a cam nut works........
H4
H3
H1
H3
(P1)
H3
(P3)
H1
(P3)
H1
H4
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
H3
H1
H1
H3
H1
Raw Edge
Page 5