fantastic furniture Hamilton Bedside 2 Drawer Manual page 9

Step 9
You will need
8 x Cam Nuts Phillips Head
(H4) Screwdriver
Attach Drawer Sides (P8x2&P9x2) to Drawer Front (P7x2). Insert 8 x Cam Nuts (H4) into the holes
of Drawer Sides (P8x2, P9x2). Make sure the opening on cam nuts point towards the incoming
cam bolts. Tighten with a Phillips Head Screwdriver.
Step 10
Slide the Drawer Base (P10x2) into the grooves
between drawer sides as shown.
Step 11
You will need
8 x Medium
Phillips Head
Screws (H2)
Screwdriver
Attach Drawer Backs (P11x2) to Drawer
Sides (P8x2&P9x2) with 8 x Medium
Screws (H2), make sure that the groove lines
up the whole way around the drawer. Tighten
with a Phillips Head Screwdriver.
fantasticfurniture.com.au
(P8)
(P7)
(P8)
(P8)
(P9)
(P10)
(P9)
(P11)
(P9)
x2
x2
x2
Page 9