Equipment Care - UMF Medical 4040-650 Owner's Manual

Hide thumbs Also See for 4040-650:
Table of Contents

Advertisement

EQUIPMENT CARE

Care of upholstery
The upholstery material used on the top, leg rest, and headrest is
resistant to most medical stains.
For light cleaning:
A solution of 10% liquid soap and clean water applied with
1
a soft damp cloth will remove disinfection cleaner build-up.
If necessary, a solution of liquid cleanser and water can be
2
applied with a soft bristle brush. Wipe away residue with a
water-dampened cloth.
For disinfection:
Dampen a soft white cloth with a solution of standard
1
bleach (sodium hypochlorite) or other chlorine-based
cleaner*** and water; 10% bleach, 90% water.
Rub gently.
2
If necessary, allow the 1:10 diluted bleach (sodium
3
hypochlorite) solution to puddle on the affected area or
apply with a clean, soaked cloth for approximately 30
minutes. Rinse with a water-dampened cloth to remove any
remaining bleach concentration.
Rinse with a water-dampened cloth to remove cleaner
4
solution and allow thorough drying of material.
***See current CDC Guidline for Disinfection & Sterilization in
Healthcare Facilities for bleach alternative cleaners.
Note: Immediately remove any fluid spilled on upholstery
surface.
Antimicrobial: UMF Medical Upholstery providers outstanding
protection in difficult medical and healthcare environments
and contains an agent effective against bacterial and fungal
microorganisms.
QUESTIONS, COMMENTS OR SERVICE REQUESTS
Contact:
UMF Medical Customer Service
1316 Eisenhower Blvd
Johnstown, PA 15904
* For service requests, please have model % serial number available.
Toll Free: 1(800) 638-5322
Email: customerservice@umfmedical.com
Fax: 1(814) 266-1870
Care of painted surfaces
A chemical acid-resistant paint is used, but extreme care
must be taken not to use ammonia-based cleaners or
discoloration of paint may occur. A damp cloth or mild
liquid soap solution should be sufficient.
Care of bright metal surfaces
All non-painted surfaces, chrome plated, or stainless steel
should be wiped weekly with a clean damp cloth then
buffed to a lustrous shine with a soft dry cloth.
Care of base
The protective base is easily washable with mild liquid soap
and water. A soft bristle brush may be used on scuffed o
stained areas.
CAUTION:
WHEN THE USE OF STRONG
CLEANING SOLUTIONS IS NECESSARY,
TEST AN INCONSPICUOUS AREA
TO ASSURE THAT DAMAGE TO
UPHOLSTERY OR PAINTED SURFACES
WILL NOT OCCUR.
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

4070-650

Table of Contents