Operation - Haier AS09NCHHRA Operation Manual

Operation

ON/OFF
23
22 FAN MODE
21
20 SMART
19
18
10
Note:
1. Press "HEALTH"+"HEALTH AIRFLOW" simultaneously can
set and cancel the "LOCK" function (
18. TIMER button
19. CLOCK button
20. SMART button
21. HEALTH button
22.
FAN MODE button
23. SWING up/down button
24. SWING left/right button
25. SLEEP button
26. HEALTH AIRFLOW button
27. LIGHT button
Control the lightening and
extinguishing of the indoor
24
LED display board.
25
28. CODE button
26
A-b yard
27
29. APPLY button
28
30. 10°C button
29
special heating set
30
function: 10 degree
heating maintaining
(valuable for RS)
)
Clock set
ON/OFF
FAN MODE
SMART
10
Note:
The distance between the signal transmission head and
the receiver hole should be within 7m without any obstacle
change-over wireless telephone is installed in the type
in receiving the signals, so the distance to the indoor unit
should be shorter.
Full display or unclear display during operation indicates the
batteries have been used up. Please change batteries.
If the remote controller can't run normally during operation,
please remove the batteries and reload several minutes later
Hint:
Remove the batteries in case unit won't be in usage for
a long period.
1
Press CLOCK button,
2
Press "+" or "-" to set
correct time.
Each press will increase or
decrease 1min. If the button is
kept pressed, time will change
quickly.
3
press APPLY, "TIME"
starts
working.
.
2