Operation Base Operation Emergency operation and test operation Emergency Operation: Use this operation only when the remote controller is defective or lost, and with function of emergency running, air conditoner Remote controller TURBO/QUIET can run automatically for a while. When the emergency operation switch is pressed, the " Pi " sound is heard once, which means the start of this operation.
Operation Sleep Operation Note When TIMER function is set, the sleeping function can’t be set up .After the sleeping function is set up if user resets Before going to bed,you can simply press the SLEEP TIMER function, the sleeping function will be cancelled; the button and unit will operate in SLEEP mode and bring machine will be in the state of timing-on.
Operation Timer On/Off On-Off Operation Health airflow Operation 1.Press to starting 1.After unit starts, select your desired operation mode. Setting the comfort work conditions. 2.Press TIMER button to change TIMER mode. Every 2.The setting of healthy airflow function time the button is pressed, display changes as follows: Press button to select “...
Maintenance For Smart Use of The Air Conditioner Remote Controller Indoor Body Setting of proper room Do not block the air inlet temperature or outlet Proper Wipe the air conditioner by using a soft and temperature dry cloth.For serious stains,use a neutral Do not use water ,wipe the controller with a detergent diluted with water.Wring the water out of the cloth before wiping.then wipe off...
Page 7
Cautions WARNING Please call Sales/Service Shop for the Installation. Do not attempt to install the air conditioner by yourself because improper works may cause electric shock, fire, water leakage. WARNING Check proper When abnormality such as burnt-small found, Use an exclusive immediately stop the operation button and power source installation of the...
Trouble shooting Cautions Before asking for service, check the following first. The machine is adaptive in following situation Cause or check points Phenomenon 1.Applicable ambient temperature range: When unit is stopped, it won't restart The system does not restart immediately until 3 minutes have For: T1 C/23 immediately.