1. Manuals
  2. Brands
  3. Discount Car Stereo Manuals
  4. Car Stereo System
  5. JAG-HF
  6. Quick start manual

Discount Car Stereo JAG-HF Quick Start Manual

Hide thumbs Also See for JAG-HF:
Table of Contents

Advertisement

Quick Links

Download this manual
Courtesy of: DiscountCarStereo.com
Serving the internet community since 1995
JAG-HF
QUICK START BLUETOTH INSTALLATION GUIDE FOR SELECT JAGUAR XJ & XK WITH CD CHANGER
1998-03 x308 and 1997*-06 x100

Advertisement

Table of Contents
loading

Related Manuals for Discount Car Stereo JAG-HF

Summary of Contents for Discount Car Stereo JAG-HF

  • Page 1 Courtesy of: DiscountCarStereo.com Serving the internet community since 1995 JAG-HF QUICK START BLUETOTH INSTALLATION GUIDE FOR SELECT JAGUAR XJ & XK WITH CD CHANGER 1998-03 x308 and 1997*-06 x100...
  • Page 2 Introduction Safety comes first when you’re on the road, so having an intuitive and easy to use Bluetooth kit is essential to reducing driver distraction. The JAG-HF kit is compatible with virtually all Bluetooth phones, and sounds great for mobile conversations or streaming music.
  • Page 3 Fig. 3a Fig. 2 Connect one end of included 16 ft. 3.5mm male-male audio cable to module AUX jack (See Fig. 4), and route to center console. Connect factory male plug (See Fig. 2) to module: simply align marks on factory male plug with that on module female connector Connect module male right-angle plug (See Fig.
  • Page 4 Fig. 7 Fig. 8 Routing audio cable Use a pry tool to open gap between window pillar and rear deck as seen in Fig. 5. Go into trunk and fish the audio cable through and into cabin. (See Fig. 6) Fig.

  • Page 5: Bluetooth Module Installation

    Bluetooth module Red wire requires 12V accessory. (Do not connect to Bluetooth module installation constant battery supply) and Black wire must be grounded. In our test vehicle (2001 XJR Premium Audio), the Bluetooth module was secured to center armrest sidewall (See Fig. 10) and is our recommendation. In this Factory connector/Plug Ignition supply wire Ground wire...
  • Page 6 3. Connect supplied (3ft.) audio cable (See Fig. 14) to module “AUX” input 5. Consider where to install push-button/microphone. Keep in mind the jack, (See Fig. 15). Route other end to dash area or location where push-button must be within drivers reach and facing forward for voice audio device will reside (within 3ft).

  • Page 7: Usb Charging Port

    USB charging port Module USB port is for charging only. Please note this may not provide sufficient current to charge newer power-hungry devices (e.g., iPhones). If you own one of these newer devices, consider purchasing our USB-DM3 Smart charging Kit. You may install the provided USB kit in 1 of 3 ways: These are also applicable to optional USB Fast Charge Kit.

  • Page 8: Bluetooth Pairing And Connection

    Bluetooth pairing and connection This process is required the first time you use the JAG-HF. After initial pairing, the JAG-HF will automatically reconnect with the paired phone upon entering vehicle. Turn the vehicle ignition to “ON”. Fig. 24 Red LED inside module will begin to flash...

  • Page 9: Bluetooth Operation

    Fig. 27 Blackberry (Assistant) *Audio controls not applicable in Aux mode. Use the Aux device built-in Radio must be in “CD Mode” when using the JAG-HF. CD Changer remains control for music selection and controls. connected but will no longer play.
  • Page 10 A2DIY-JAG98R What’s the major difference between the JAGCD-HF and JAG-HF? CD changer retention ✓ ✓ ✓ The JAGCD-HF requires and retains the CD changer, the JAG-HF requires Audio input (aux) ✓ ✓* Optional Optional but does not retain use of the CD changer. (Changer remains connected Charging (USB) ✓...

Table of Contents